Vettaville.nl
Line 6.com Relay Wireless systems Tyler Variax POD X3 series
email
vvnllogosml
 

M13 Stompbox Modeler /

 
 

SOURCE: VETTAVILLe.NL
top of page

Stompbox - M13 Stompbox - modeler update V. 2.01 is available... 11-10-2009

Line 6 released a small update for M13 stompbox modeler V. 2.01.

This Flash Memory v2.01 update is recommended for all M13 owners and fixes a Relative Mode 4>3>2>1 routing issue.

Firmware Update Instructions:

  • After you download the v2.01 Flash Memory file to your computer, please click here for step by step instructions on how to properly update your M13 to version 2.01. (instructions are the same as for v2.00)

M13 Advanced Guide:

  • For an in-depth guide to the features and functionality of the M13, including info not included in the Pilot's Handbook, check out the M13 Advanced Guide here, along with the M13/M9 Model Gallery and the M9 & M13 FX Parameters pdf.

WARNING: Back Up Your Scenes

  • Any time you update your M13 firmware you will be replacing all your custom Scenes with the Factory defaults. So if you want to keep your custom Scenes, be sure to back them up before you install the update.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - modeler update V. 2.0 info... 01-10-2009

Free Update!, Models and More for M13 Stompbox modeler

Dramatically expand the functionality of your M13 Stompbox Modeler with a free update from Line6.com.

Additional distortions, reverbs, delays and more will boost the model count of your M13 Stompbox Modeler to over 100 total effects. That’s an increase of almost 30 percent for free!

For those not in the know, M13 Stompbox Modeler is a tank-tough multi-effect pedal that is powerful like a pedal board and simple like a stompbox. It delivers a truly inspiring variety of tones provided by its hand-picked collection of vintage and modern stompbox effects.

Built like four side-by-side FX Units, M13 Stompbox Modeler can run any four effects simultaneously – in any order and arrangement you choose – with eight more effects on deck.

With the new update (v2.0), you can create and save up to 48 different pedal board effect arrangements, called “scenes,” which is a huge jump from the original 12. Save a scene for your metal band, one for your Top 40 gig…you get the picture. No more tearing up Velcro® just to swap one or two pedals!

Get the free update now!

While you wait for the update you can checkout the new modellist

New stuff in M13 2.0 update since 1.07

  • New Models (Descriptions on the M13 website now)
  • Pattern Tremolo
  • Barberpole Phaser
  • Script Phaser
  • AC Flanger with Bucket Brigade chip modeled
  • 80A Flanger with Bucket Brigade chip modeled
  • Frequency Shifter Line 6 original
  • Clean Bass Octaver
  • 5 EQs
  • 8 Wahs
  • Smart Harmony
  • Pitch Glide
  • Particle Verb Line 6 original

 

New Features for 2.0 M13

  • Relative mode (parameters don’t jump to the knob position)
  • 4 folders of 12 scenes each (total of 48 scenes) Also accessible via Midi
  • Copy effect from one Scene to another Scene.
  • Control the Looper via midi without the M13 going into looper mode
  • Dim OFF for inactive pedals
  • Heel/Toe pixels to show you where the expression pedal heal and toe are
  • Sync to Midi beat clock
  • Re-syncing LFOs for mods and filters on Tap temp
  • Redo looper function

 

New features from 1.07 update if you are on 1.04

  • BPM in menu that is scene specific
  • FX loop OFF as a parameter to use that is scene specific
  • Octo verb crackles fixed
  • Hitting rev from record/overdub goes into play reversed immediately
 

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - New update expected early fall 2009... 17-07-2009




There's a general expectation to the next update of the M13 stompbox modeler, that assumes it would be a late summer release. The current projection is at early fall but it looks like the update will be worth the wait. In the meanwhile have a nice summer holiday. At Line 6 they keep working and implementing.. ..

Source: vettaville.nl

top of page

Stompbox - M13 Stompbox - Patch database available... 26-06-2009



A new service has been enabled at Vettaville.nl. M13 Stompbox modelr patches can be uploaded, printed and shared with your fellow musicians or for your own storage of settings.
Vettaville.nl holds a database for all products that are not CustomTone enabled. Or in other words those Line 6 products that can save your own patches but they can not be exchange via MIDI or USB. Products like the Spider Series, Low-Down Bass Amps, Spider Valve, DL-4 and now M13 Stompbox modeler etc.

The new database offers:
  • Viewing of knob settings for all or selected patches in the database
  • Printing of knob settings for all or selected patches in the database
  • Selecting patches for music types
  • Upload and save strorage of personal patches
  • Look and feel of the amp or stompbox panel lay-out
  • Free use of the database
The use of the database is free however you need to have a free account to be able to upload your own entries. These entries will give you an extra savehaven for your settings in case you have a rentalamp or you're with a friend and forgot to write down your settings. In these cases you just visit vettaville.nl and have that extra back-up that's always available wherever there's an internet connection at hand.

The first patches that are uploaded are the factory patches of the LowDown amps, but all other areas are already enabled for upload of your own patches. You can log in for free here.

How to use the Patch Database
To use the database select patch Database in the Patches Menu. Then you can choose what Stompbox- or Amp-type you need viewing of patches for. Select it and click next. Now all patches for the selected geartype will be visible.

Selecting Patches
If you want to make a slection of the selection use the upright box that says all and open it. Now select the music type that you want the patches for and only those that meet the selection will be visible.

Printing Patches
If you want to print out some patches, just move your mouse to the liitle square box on the right of the patch and click your left mouseknob. It will show a little v-mark to select the patch for printing or export to a .pdf that you can upload to most mobile phones or save on your own computer. Select as many as you want and click print. Follow to the steps of your own printer to print them.

Patches for M13 stompbox modeler are printed in black/white at request to save toner or inkt and will save your inkt or toner...

Uploading Patches
To upload patches you need to be logged in. You can log in for free here.After the correct login you'll be re-directed to the latest news page. If you're see a blank page appear, that means that you're not logged in.

If you want to upload patches you need to select the Upload Patches link from the downloads menu under Patches > Upload Patches. Here's a re-direct link.

Short Steps.

1. Log-In
2. When you're logged in go the upload patches page and click on "add a new patch"
3. Select the product where you want to upload a patch for by clicking the approriate add button.
Fill out the info presented and turn the amp knobs to their desired position. When all are in the right position press save or next. Now your patch is saved.


Uploading Patches for M13 Stompbox Modeler
To upload patches you need to be logged in. You can log in for free here.After the correct login you'll be re-directed to the latest news page. If you're see a blank page appear, that means that you're not logged in.

If you want to upload patches you need to select the Upload Patches link from the downloads menu under Patches > Upload Patches. Here's a re-direct link.

Source: vettaville.nl

top of page

Stompbox - M13 Stompbox - New Flashmemory v. 1.07 available... 09-04-2009



Line 6 just released new flashmemeory for M13 stompbox modeler.

This Flash Memory v1.07 update is recommended for all M13 owners.

Release Notes:
  • A new Tempo BPM setting has been added to the Setup menus. This setting is saved per Scene.
  • The Distortion/Comp model defaults have been releveled for a more consistent volume experience when auditioning models.
  • FX OFF has been added as an FX Loop parameter in the Setup menus. This setting is saved per Scene.
  • Also in the Setup menus, all of the following settings are Scene-specific: Gate/FX Loop/True-DSP Bypass/Tempo/Expression Pedals.
  • The Octo 'crackles' issue has been fixed.
  • Tap Tempo has been tweaked to average three taps as per DL4 (when more than 2 taps are tapped).
  • FX are no longer bypassed after entering/exiting Tuner mode.
  • True Bypass feedback issue has been fixed: switching FX off in True Bypass mode clears any regenerating Delays or Reverbs.
  • Looper feature: hitting Reverse from Record/Overdub immediately stops recording and begins reverse playback of the loop.
v1.07 Firmware Update Instructions:
  • After you download the v1.07 Flash Memory file to your computer, please clickhere for step by step instructions on how to properly update your M13 to version 1.07.
M13 Advanced Guide:
  • For an in-depth guide to the features and functionality of the M13, including info not included in the Pilot's Handbook, check out the M13 Advanced Guidehere.
You can download the new software here. Please note you need to be logged in to download

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - New Flashmemory V. 1.06 update instructions... 08-04-2009



Here's the new update instructions for M13 Stompbox Modeler V. 1.06 .

The V. 1.06 update fixes the following in the M13:

 

  • A new Tempo BPM setting has been added to the Setup menus. This setting is saved per Scene.
  • The Distortion/Comp model Defaults have been releveled for a more consistent volume experience when auditioning models.
  • FX OFF has been added as an FX Loop parameter in the Setup menus. This setting is saved per Scene.
  • Also in the Setup menus, all of the following settings are Scene-specific: Gate/FX Loop/True-DSP Bypass/Tempo/Expression Pedals.
  • The Octo 'crackles' issue has been fixed.
  • Tap Tempo has been tweaked to average three taps as per DL4 (when more than 2 taps are tapped).
  • FX are no longer bypassed after entering/exiting Tuner mode.
  • True Bypass feedback issue has been fixed: switching FX off in True Bypass mode clears any regenerating Delays or Reverbs.
  • Looper feature: hitting Reverse from Record/Overdub immediately stops recording and begins reverse playback of the loop.

 

 

M13 FIRMWARE UPDATE INSTRUCTIONS

 

NEEDED:

 

• A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed)

• 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables)

• A MIDI sequencer app such as Cubase or a sysex app -- if you don't have a sysex app installed, do a Google search for MIDI Ox (Windows) or Sysex Librarian (Mac) then download one or the other and install it. When your MIDI interface, Driver and sysex app are ready to go, follow PROCEDURE instructions below.

 

ADDITIONAL INSTRUCTIONS For Windows Users Using MIDI Ox:

 

1. Make sure the Driver is installed and working.

 

2. Run the MIDI Ox application.

 

3. Go to Option, then MIDI Devices; select USB Audio Device for both MIDI Inputs and MIDI Outputs; uncheck Automatically Attach Inputs To Outputs During Selection; click OK to accept it.

 

4. Go to View, then Port Routing; delete the connection between Input Ports and Output ports if they are connected; make sure only MIDI Ox Event Port connects to Output Ports.

 

5. Go to View, then Sysex; in Sysex View and Scratchpad, go to Sysex, then Configure, make sure to check Delay After F7 and set the Delay (Milliseconds Between Buffers) to 60ms; click OK to accept.

 

Now you're ready to go. One more thing: If the update fails when using a USB hub, please try it without the hub.

 

 

PROCEDURE:

 

1. Connect your MIDI interface to your computer via USB cable.

 

2. Connect the M13 MIDI Out to your MIDI interface In, and connect the M13 MIDI In to your MIDI interface Out.

 

3. Power on the M13 while pressing and holding down the 'Model Select' knob in FX UNIT 1 to put the M13 into FLASH UPDATE MODE.

 

4. Make sure your computer is set up to 'see' the MIDI interface (on Mac, you must configure Audio MIDI Setup -- on Win, see ADDITIONAL INSTRUCTIONS For Windows Users above).

 

5. Download the latest M13 Firmware from the Line 6 website (log in with your Line 6 User Name).

 

6. Launch your sysex app and select your MIDI interface Out port (for Sysex Librarian, use the top dropdown menu -- for MIDI Ox, select Options/MIDI Devices).

 

7. Load the M13 sysex file (in Sysex Librarian, select 'Add to Library' from the File menu; In MIDI Ox, select Actions/Send/SysEx File from the File Menu; then navigate to the M13 sysex file you downloaded from the Line 6 website).

 

8. Press Play (Sysex Librarian) or if using MIDI-OX the file will be automatically transmitted once it is selected in the previous step.

 

9. The M13 will receive the sysex data and the unit will be updated to the latest Firmware.



Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - Releasenotes for V. 1.06... 31-03-2009



Since the release for new firmware V. 106 is eminent you're probably wondering what will change. Whell here are the releasenotes for V. 1.06

  • A new Tempo BPM setting has been added to the Setup menus. This setting is saved per Scene.
  • The Distortion/Comp models have been releveled for a more consistent volume experience when auditioning models.
  • FX OFF has been added as an FX Loop parameter in the Setup menus. This setting is saved per Scene.
  • Also in the Setup menus, all of the following settings are Scene-specific: Gate/FX Loop/True-DSP Bypass/Tempo/Expression Pedals.
  • The Octo 'crackles' issue has been fixed.
  • Tap Tempo has been tweaked to average three taps as per DL4 (when more than 2 taps are tapped).
  • FX are no longer bypassed after entering/exiting Tuner mode.
  • True Bypass feedback issue has been fixed: switching FX off in True Bypass mode clears any regenerating Delays or Reverbs.
  • Looper feature: hitting Reverse from Record/Overdub immediately stops recording and begins reverse playback of the loop.


Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - New Flashmemory expected shortly... 30-03-2009



Prepare to download the new V. 1.06 version software for M13 stompbox modeler shortly. V. 1.05 was expected however due to internal builts and improvements V. 1.06 will be the release candidate and can be downloaded soon and uploaded to your personal M13 stompbox modeler.

Source: vettaville.nl

top of page

Stompbox - M13 Stompbox - New Flashmemory V. 1.04 available... 16-10-2008



Line 6 relased new firmware for M13 stompbox modeler.

This Flash Memory v1.04 update is recommended for all M13 owners.

Release Notes:
  • MIDI CC for FX Off will now react only for an On memory state.
  • True Bypass issue when new Scene is selected following a Scene with all FX bypassed has been fixed.
  • "Copy Completed" message has been added to indicate a successful Scene Copy action.
  • A few other proprietary enhancements have been implemented.
V. 1.04 Firmware Update Instructions:
  • After you download the v1.04 Flash Memory file to your computer, please click here for step by step instructions on how to properly update your M13 to version 1.04.
  • Click here to download the new firmware.
Please note you have to be logged in to the Line 6 site to be able to download


Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 Stompbox - Flashmemory Update instrutions... 16-10-2008



If you haven't updated your equipment through a MIDI deveice like MIDI-OX before, this guide may help you to install new firmware in your M13 Stompbox Modeler.

M13 FIRMWARE UPDATE INSTRUCTIONS

NEEDED:

• A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed)
• 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables)
• A MIDI sequencer app such as Cubase or a sysex app -- if you don't have a sysex app installed, do a Google search for MIDI Ox (Windows) or Sysex Librarian (Mac) then download one or the other and install it. When your MIDI interface, Driver and sysex app are ready to go, follow PROCEDURE instructions below.

ADDITIONAL INSTRUCTIONS For Windows Users Using MIDI Ox:

1. Make sure the Driver is installed and working.

2. Run the MIDI Ox application.

3. Go to Option, then MIDI Devices; select USB Audio Device for both MIDI Inputs and MIDI Outputs; uncheck Automatically Attach Inputs To Outputs During Selection; click OK to accept it.

4. Go to View, then Port Routing; delete the connection between Input Ports and Output ports if they are connected; make sure only MIDI Ox Event Port connects to Output Ports.

5. Go to View, then Sysex; in Sysex View and Scratchpad, go to Sysex, then Configure, make sure to check Delay After F7 and set the Delay (Milliseconds Between Buffers) to 101; click OK to accept.

Now you're ready to go. One more thing: If the update fails when using a USB hub, please try it without the hub.


PROCEDURE:

1. Connect your MIDI interface to your computer via USB cable.

2. Connect the M13 MIDI Out to your MIDI interface In, and connect the M13 MIDI In to your MIDI interface Out.

3. Power on the M13 while pressing and holding down the 'Model Select' knob in FX UNIT 1 to put the M13 into FLASH UPDATE MODE.

4. Make sure your computer is set up to 'see' the MIDI interface (on Mac, you must configure Audio MIDI Setup -- on Win, see ADDITIONAL INSTRUCTIONS For Windows Users above).

5. Download the latest M13 Firmware from the Line 6 website (log in with your Line 6 User Name).

6. Launch your sysex app and select your MIDI interface Out port (for Sysex Librarian, use the top dropdown menu -- for MIDI Ox, select Options/MIDI Devices).

7. Load the M13 sysex file (in Sysex Librarian, select 'Add to Library' from the File menu; In MIDI Ox, select Actions/Send/SysEx File from the File Menu; then navigate to the M13 sysex file you downloaded from the Line 6 website).

8. Press Play (Sysex Librarian) or if using MIDI-OX the file will be automatically transmitted once it is selected in the previous step.

9. The M13 will receive the sysex data and the unit will be updated to the latest Firmware.



Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - V. 1.04 update expected... 11-10-2008



There's a very good chance of an update for M13 surfacing next week for download . Depending on final beta tests and there results it's currently expected to have  V. 1.04 see the daylights somewhere next week. Please don't hold us to the release date as there might be unforeseen developments that will trigger a delay in release.

Stay tuned for the announcement for download as soon as it will be available.

Source: vettaville.nl

top of page

Stompbox - M13 stompbox - Whammy - Video... 29-08-2008



Here' a video that caught our attention made by Stilwel. It demonstrates the use of the Growler Filter effect in the M13 Stompbox modeler, that can be used as a kinda of a whammy pedal. Thanks go out to stilwell once again for making this demo video .

 

Thanks go out to Stilwel for providing the clips, you can find more of them on You Tube.

Source: Stilwell / You Tube

top of page

Stompbox - M13 stompbox - Dual Delay - Video... 26-08-2008



Here' a video that caught our attention made by Stilwel. It demonstrates the use of dual delays in the M13 stompbox modeler. There's a strat with 57/62 RI Fender strat pickups with Fender 10-46 Super Bullets being playing into the Axe-FX modeler with an AC30 simulation. This one on the edge of U2 .

 

Thanks go out to Stilwel for providing the clips, you can find more of them on You Tube.

Source: Stilwell / You Tube

top of page

Stompbox - M13 stompbox - Set Up en FX Routing (video)... 18-08-2008


 

Line 6 started shipping the M13 Stompbox modeler and we were lucky enough to get the first one from our dealer. Here's a quick video explaning the setup in a scene and  FX units routing We're still playing the M13 and exploring it's possibillities.. .


Channel 6 TV
Channel 6 Web TV -
M13 Stompbox Modeler

Part 1/1 M13 Set Up en FX routing

 

Source: vettaville.nl

top of page

Stompbox - M13 stompbox - Advanced Users Guide Available... 14-08-2008



The advanced Users guide for M13 stompbox modeler is now available. This guide gives you detailed information on how to use the models, their parameters, MIDI capabillities and, Scene details, Looper details etc. However intuitive the M13 is, it's always good to read, understand and discover alll possibillities in there. Happy reading. Click here to download.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Changing Effect Models (video)... 12-08-2008


 

Line 6 started shipping the M13 Stompbox modeler and we were lucky enough to get the first one from our dealer. Here's a quick video showing how to change the Models and Effects We're already having fun with it and Line 6 exceeded our expectations.. .


Channel 6 TV
Channel 6 Web TV -
M13 Stompbox Modeler

Part 1/1

 

Source: vettaville.nl

top of page

Stompbox - M13 stompbox - Sound Samples... 11-08-2008



There are new M13 stompbox modeler sound samples up at the Line 6 website . All sound samples were recorded with a '67 Gibson® 335 and a Wilkins Bluesmaster into a clean Divided by 13 JRT 9/15 amp. The amp settings remained the same for each sample. The signal chain was a Beyer® M160 microphone into an Audix® 35101 mic pre. Take a listen here.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Shipping News... 09-08-2008



The M13 stompbox modeler was announced at Frankfurter Messe and strarts shipping now.  M13 is stocked with 79 models of both classic and Line 6-original effects, pulled directly from DL4, MM4, FM4, DM4 and Verbzilla stompbox modelers.

As of now, Line 6 already started shipping the first batch of M13 Stompbox Modeler, expect them to arrive at your local dealer any time now, depending on inventory taken and ground to cover for transport. An overview of what it can do is found here.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Delay Trails... 08-08-2008



Does M13 offer delay trails? Delay trails are important to many guitarists, since with them you have the abillity to change to a new effect but still hear the delays starve in it's natural rythm from the last delay setup used. M13 offers delay trails in a scene when switching delays on and off in the FX units, however it doesn't offer delay trails between scenes.

The amount of time between changing effects and changing scenes is almost instantaneous. For the amount of information that is being processed, the changes are pretty fast. All of the effects on the M13 has either a level, output, or mix parameter to adjust how much of the effect you want to hear.

As a general remark, when you've switched to True Bypass mode in the setup screen and your only effect on is the delay you are using is switched off, the delay trail will, of course, be cut of as the true bypass relay-switches are activated. If you do this in the DSP Bypass mode the delay trails will sound through.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Up Close - Video... 28-07-2008



The  soon to be released M13 stompbox pedal doesn't have an up close look available so here it is . Please notice that this is a product in development and the actual product may look and react different.

The M13 is stoked with most if not all goodies from the stompbox modelers and the Verbzilla pedal all in one tasty looking pedalboard.
Wanna see the modelgalery? go here
Wanna read the M 13 manual? go here



Channel 6 TV
Channel 6 Web TV -
M13 - Upclose


 

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Model Gallery Available... 05-06-2008 Comments (0)




Announcing the M13 stompbox modeler at Frankfurter Messe has raised many questions on how it will work and what it can do. Line 6 uploaded the M13 stompbox modeler Modellist for you.   M13 is stocked with 79 models of both classic and Line 6-original effects, pulled directly from DL4, MM4, FM4, DM4 and Verbzilla stompbox modelers. See what's inside with the now available modellist. Complete with pictures and information.

An overview of what it can do is found here. At present it's shipping date is projected at July 2008. If you want to download the manual rightclick here and press save to download. Please note you need to be logged in to download.

For the modellist you also need to be logged in. If you're logged in to the Line 6 site, you can download it from here.

Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Manual Available... 05-06-2008 Comments (0)



Announcing the M13 stompbox modeler at Frankfurter Messe has raised many questions on how it will work and what it can do. Line 6 uploaded the M13 stompbox modeler manual for you .  M13 is stocked with 79 models of both classic and Line 6-original effects, pulled directly from DL4, MM4, FM4, DM4 and Verbzilla stompbox modelers.

An overview of what it can do is found here. At present it's shipping date is projected at July 2008. If you want to download the manual rightclick here and press save to download. Please note you need to be logged in to download.


Source: Line 6 / vettaville.nl

top of page

Stompbox - M13 stompbox - Overview... 01-04-2008




M13 is stocked with 79 models of both classic and Line 6-original effects, pulled directly from DL4, MM4, FM4, DM4 and Verbzilla stompbox modelers. Here's an overview of what it can do. The 4 FX Units built into M13 can run up to 4 effects at once, total. Each FX Unit has 3 memories, which can run any model of any type—switching between the memories is like swapping out one stompbox for another.

The FX are organized into 5 types:
• DISTORTION (yellow) has all the distortion, overdrive and fuzz effects from DM4—plus several stompbox compressors and a volume pedal
• DELAY (green) has all the delay and echo models from DL4
• MOD (blue)has the chorus, phaser, flanger, rotary and other models from MM4
• FILTER (purple provides a range of synth, wah and filter effects from FM4)
• VERB (orange) has the studio-grade reverbs and vibe-rich Octoverb from Verbzilla.


A built-in looper runs along with all the effects, providing 28 second mono operation. The looper can run before or after the FX Units, with footswitch pre/post switching.  Undo lets you discard the last recording pass. You can run the loop in reverse or at half speed (for 56 seconds loop time). Adjustable ODUBLVL (overdub level) reduces the volume of previous overdubs as you layer audio.

There are also 12 scenes, each of which is a complete pedalboard, storing all the settings of the A/B/C memories of the 4 FX Units. All scenes are loaded with an example pedalboard to get you started.

Please note: Information is unconfirmed by Line 6 and is subject to change without notice due to further development.

Source: vettaville.nl

top of page

Stompbox - M13 stompbox modeler announced... 12-03-2008

Line 6 announces M13 stompbox modeler — M13 Stompbox Modeler provides a massive collection of celebrated stompbox sounds, stunning effects and an easy to use looper—

Calabasas, Calif.—March 12, 2008—Line 6, Inc. (www.line6.com), the industry leader in modeling technology, announces M13 Stompbox Modeler, an all-in-one stompbox experience featuring sought-after stompbox sounds and an easy-to-use looper in a brawny box that’s built for the stage.

Beyond compare, M13 Stompbox Modeler offers a seemingly boundless amount of sounds and functions intuitively designed and easy to use. Delivering the sounds of many best-selling Line 6 pedals, including DL4™ Delay Modeler, MM4™ Modulation Modeler, FM4™ Filter Modeler and DM4™ Distortion Modeler, M13 Stompbox Modeler offers 74 premium stompbox effects including distortions, delays, reverbs, filters and more modeled from historic boutique, vintage and classic pedals. Up to four different effects from 12 switches can be combined at once, arranged in any order, for broad textural versatility.

Complete with a dedicated 28-second looper, M13 Stompbox Modeler allows for on-the-fly loop recording. Each looper function, including record, overdub, play/stop, reverse, half speed, undo and more, boasts a dedicated switch. At home and onstage, looping has never been easier.

Ready for anything, M13 Stompbox Modeler features ¼" mono and stereo inputs and outputs, effects loop sends and returns, MIDI input and output and two Line 6 Expression Pedal inputs for added control and functionality. Plus, with its rugged construction designed to endure, M13 Stompbox Modeler can withstand the rigors of the road and the demands of the working musician.

“The combination of killer sounds, straightforward looping and simple stompbox design sets M13 Stompbox Modeler at the head of the pack and at the center of your pedal board,” remarks Rich Renken, Line 6 Product Manager.

M13 Stompbox Modeler MSRP: $699.99
M13 Stompbox Modeler MSRP: € 584.84 (incl VAT) France

Please note that prices may vary per country as a result of local taxes

About Line 6, Inc. Incorporated in 1996, Line 6 is world renowned for developing studio- and stage-standard gear, including the award-winning POD®. Headquartered in Calabasas, California, Line 6 currently has a presence in over 60 countries worldwide with offices in the U.S., China and U.K.

Source: Line 6 / vettaville.nl

top of page

*Line 6®, Line 6 Inc., AX2, AxSys, BackTrack, BackTrack+Mic, Bass Floor POD®, Bass POD®, Bass POD® xt, Bass POD® xt Pro, Bass POD® xt Live, Constrictor™, Crunchtone™, Customtone, Duoverb, Digital Wireless, DL4™, DM4™, Echo Park™, Eight Ball, Filter Pro™, Flextone™, Floorboard, Floor POD®, Floor POD® Plus, FBV Express™, GearBoxâ„¢, GearBoxâ„¢ Plug-In, Guitarport™, GuitarPort® RiffTracker™, GuitarPort® xt, FM4™, HD147®, Jamware, JM4 Looper, LowDown, Liqua Flange™, M13, MM4™, MOD Pro, POD®, Pocket POD®, Pocket POD® Express, POD® FARM, POD® Studio, POD® xt, POD®xt Pro, POD® xt Live, POD® X3, POD® X3 Pro, POD® X3 Live, Relay Digital Wireless, Rifftracker™, Roto Machine™, Space Chorus™, Spider™, Spider-Jam™, Spider-Valve™, ToneCore™, TonePort™, TubeTone, Ubermetal™, GX, UX1, UX2, UX8, Verbzilla™, Vetta™, Variax®, Variax® Acoustic, Variax® Workbench™ and Line 6 logos are trademarks of Line 6,

Inc. RiffWorks, InstantDrummer™, Riffcaster, Rifflink and Sonoma Wire Works™ are trademarks of Sonoma Wire Works™.

Atomic, Atomic Amps, LLC, Atomic Reactor 112, Atomic Reactor 112-50 and Atomic Reactor 212 are trademarks of Atomic Amps.

Bose® and Bose® Personalized Amplification System™ are registered trademarks of Bose. T1 Tonematch, L1, All rights reserved.

SHURE and SM58 are registrated trademarks of Shure Incorparated. Sennheiser is a registered trademark of Sennheiser Electronic Corp. Audix is a registered trademark of Audix Corparation. Audio Technica is a registered trademark of Audio-Technica Corparation. Electro-Voice is a registered trademark of Telex Communications, Inc.

Vinny appears exclusively for Vettaville.nl with courtesy of Vettaville Records Inc.
Channel 6 Web TV is preserved for Vettaville.nl

All other product names used on this website are trademarks of their respective owners, which are in no way associated or affiliated with Vettaville.nl or Vettaville.net. These trademarks of other manufacturers are used solely to identify the products of those manufacturers to identify a certain tone or sound.

Entire contents Copyright © 2003-2010 Vettaville.nl. All Rights Reserved.
Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in Vettaville.nl or Vettaville.net website(s). Prices subject to change without notice.

Copyright © Vettaville.nl 2003-2010, All rights reserved.