DT25 /

SOURCE: VETTAVILLe.NL

DT25 - DT25 Free V. 2.0 update available - part 2... 31-10-2012 Comments (0)

Here a short overview on what you achieve per channel with the V2.0 update installed. The most advanced standalone configurable amp to date.

Source: Line 6 / Vettaville.nl

DT25 - DT25 Free V. 2.0 update available... 30-10-2012 Comments (0)

Line 6 Expands Versatility of DT-series Amplifiers with Free v2.0 Firmware Update

New HD preamps and configuration options transform DT50 and DT25 into boutique amp factories

Rugby, UK—October 30, 2012—Line 6, Inc. today announced the release of DT50™/DT25™ v2.0 firmware, a free update that dramatically expands the number of HD preamps and gives musicians unprecedented ability to create unique amp voicings.

Co-designed by Line 6 and tube-amp guru Reinhold Bogner, DT series guitar amplifiers combine reconfigurable analog topologies with Line 6 technology to provide boutique feel and sonic versatility. The v2.0 firmware update expands the HD preamp count from four to 30, and gives users the ability to create unique amp tones by pairing any preamp with any combination of dynamic topologies (negative feedback loop, operating class, power tube mode, and more) within Reinhold Bogner’s reconfigurable tube power amp.

Musicians can load a DT amp with up to eight unique voicings (four on channel A, plus four on channel B), providing a wide array of tones for performance and recording. They can also connect a POD® HD multi-effects to access even more custom voicings.

The new firmware update also lets musicians configure each voicing with a choice of 12 reverbs, each with unique parameter settings. Switching between Channel A and Channel B now includes reverb spillover, which lets the reverb finish its decay. In addition, DT50 amp owners have the option of setting the 12AX7 boost per amp model.

DT50/DT25 firmware v2.0 is now available. It can be downloaded via the  Line 6 Monkey Intelligent Updater software and requires a USB-to-MIDI interface. Customers can control the enhanced MIDI functionality from an iPhone® or iPad® by adding a Line 6 MIDI Mobilizer™ II interface (and Touch OSC, MIDI Memo Recorder, or any other compatible MIDI app). Alternately, they can use a Mac® or PC computer with a USB-to-MIDI interface and compatible software capable of sending MIDI CC information. 

Learn more at line6.com/dtv2update/

Source: Line 6 / Vettaville.nl

DT25 - DT25 Overview Video... 29-09-2011 Comments (0)

Vettaville brought it to you on October 24th, Line 6 announced the DT25 amplifier yesterday. Here's an official overview video with sound samples and features shown.

Source: Line 6 / Vettaville.nl

DT25 - DT25 Pressrelease... 29-09-2011 Comments (0)

LINE 6 SHIPS DT25™ GUITAR AMPLIFIERS
– New family of tube amps from Line 6 and tube-amp legend Reinhold Bogner combine reconfigurable analog components and HD modeling technology to deliver boutique tone, feel and touch response, and multiple amplifier voicings –
 
CALABASAS, Calif.—September 27, 2011—Line 6, Inc. (line6.com), the industry leader in digital modeling technology for musicians, just shipped the DT25 family of amplifiers, which includes DT25 112 Combo, DT25 Head, DT25 112 Extension Cab. The new 25W/10W tube amps deliver boutique sound and performance via a uniquely versatile design by renowned amp designer Reinhold Bogner and advanced HD modeling technology from Line 6.

“DT25 is like four boutique tube amps in one,” remarked Elliot Chenault, Line 6 Product Manager.  “Bogner’s innovative design applies reconfigurable analog components to provide incredible sonic flexibility and the rich tone, feel and touch response his amps are known for.”

The new amplifiers provide guitarists with four guitar amp voicings, or sonic signatures: American clean, British crunch, Class A chime and modern high-gain.  Each voicing is the perfect combination of negative feedback loop topology and HD preamp and tone stack modeling.  Add to that the reconfigurable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased) and power tube mode (Pentode or Triode) and guitarists can dial in classic vintage tones or highly customized originals of their own creation.

The simple, two-channel design provides uncommon flexibility.  Each channel is independent – not “clean” or “dirty” – and any configuration of voicing, operating class and power tube mode can be dialed in to either channel. A flick of the A/B switch (or a tap of a latching footswitch) is capable of causing a full analog and digital transformation.

DT25 amplifiers feature L6 LINK™ jacks for connection to new Line 6 POD® HD multi-effect processors. When connected, the POD HD adds effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers).  The amplifiers’ back panels also feature MIDI I/O, a serial effect loop, multiple speaker outs and a direct out with cabinet simulation, which provides the rich DT25 tone without having to mic the speaker.

DT25 amplifiers feature one 12AX7 and two EL84 tubes, custom-voiced Celestion® G12H90 speakers, and modeled spring reverb with individual level control per channel.

Learn more about DT25 at www.line6.com/dt25.

DT25 112 Combo - €749.99 MSRP
DT25 Head - €675.00 MSRP
DT25 112 Extension Cab - €225.00 MSRP

# # #

About Line 6, Inc.
Based in Calabasas, California, Line 6 is a leading manufacturer of guitars, amplifiers, effects, effect processors, recording interfaces and digital wireless systems.  The company is world renowned for its studio- and stage-standard gear featuring its patented amp and effect modeling and digital wireless technologies.  Line 6 invented digital guitar amp modeling technology in 1996 and is currently the #1 maker of guitar amplifiers.  Its award-winning products are used by musicians worldwide and have been featured on countless platinum and Grammy® award-winning titles.  Line 6 is distributed in over 60 countries with operations in the United States, the United Kingdom, China and Japan.  For more information, visit www.line6.com.

Source: Line 6 / Vettaville.nl

DT25 - DT25 Pricing information... 28-09-2011 Comments (0)

We've received pricing info for on the DT25 series.

For Holland these prices include 19% VAT.

DT25-112              € 749,99

DT25 Head            € 675,00

DT25 112 ext Cab. € 225,00

DT50-112             € 1429,00

DT50 Head           € 1199,00

DT50 412 Cab        € 679,00

UK Prices

DT25 112 Combo -   £669.99 MSRP inc VAT
DT25 Head -             £599.99 MSRP inc VAT
DT25 112 Ext. Cab - £199.99 MSRP inc VAT

Source: Line 6 / Vettaville.nl

DT25 - DT25 page at Line 6 online... 27-09-2011 Comments (0)

Line 6 uploaded their DT25 amplifier pages at Line6.com

To see all the different pages with videos, info, etc click here

Source: Line 6 / Vettaville.nl

DT25 - DT25 MIDI Chart... 27-09-2011 Comments (0)

Guitarists are always looking for new ways to control their gear. MIDI implementation on their gear helps them to achieve their goals for instant switching of gear and therefore sounds. Line 6 implemented MIDI functionallity on the DT25.

Continous Controller (MIDI CC #) Value Function

19 0-63 = Channel A, 64-127 = Channel B Channel A/B Toggle
77 0 = Voicing I, 1 = Voicing II, 2 = Voicing III, 3 = Voicing IV Channel A Voicing (I, II, III, IV)
73 0-63 = Class A, 64-127 = Class AB Channel A Operation Class Configuration (Class A / Class AB)
75 0-63 = Triode, 64-127 = Pentode Channel A Power Tube Configuration (Pentode/Triode)
36 0-63 = Reverb Off, 64-127 = Reverb On Channel A Reverb On/Off
114 0 = Voicing I, 1 = Voicing II, 2 = Voicing III, 3 = Voicing IV Channel B Voicing (I, II, III, IV)
115 0-63 = Class A, 64-127 = Class AB Channel B Operation Class Configuration (Class A / Class AB)
116 0-63 = Triode, 64-127 = Pentode Channel B Power Tube Configuration (Pentode/Triode)
105 0-63 = Reverb Off, 64-127 = Reverb On Channel B Reverb On/Off

Source: Line 6 / Vettaville.nl

DT25 - DT25 Manuals, FAQ and Terminology available... 26-09-2011 Comments (0)

Line 6 offered the DT25 manuals for download. Quickstart Guide and L6LINK connectivity guides. FAQ and used Terminology explanation pages are also available

DT25 112 Quickstart here

DT25 Head Quickstart here

DT25 Connectivity Guide here

DT25/DT50 FAQ here

DT25/DT50 Termonlogy explained here

Source: Line 6 / Vettaville.nl

DT25 - DT25 amplifier information (Head)... 26-09-2011 Comments (0)

DT25 25W/10W Guitar Amplifier Head by Line 6 information

DT25™ - Four boutique tube amps in one

• Boutique sound and performance
• Uniquely versatile tube amp design by Reinhold Bogner
• Advanced HD modeling technology

If your tone is your masterpiece, DT25 is your paintbrush. This portable 25W/10W tube amp from Line 6 and tube-amp guru Reinhold Bogner gives you four stunning, lust-worthy amp voicings and unprecedented versatility that lay the foundation for you to build your perfect tone.

The powerful combination of reconfigurable analog components and HD modeling allows the DT25 amp to be four boutique tube amps in one capable of producing stunning American cleans, British crunch, class A chime and modern high-gain. Selectable operating class, power tube mode and four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals – and each one drips with boutique tone and touch-response.

The DT25 amp gets to the point. It’s a simple, two-channel amp with a streamlined front panel. But if you connect a POD® HD multi-effect pedal or POD® HD Pro multi-effect rack to this little monster the two integrate to become a boutique tube amp factory!

Connected via exclusive L6 LINK™ technology, the DT25 amp and POD® multi-effect rewrite the traditional amp/multi-effect paradigm and introduce powerful new concepts in control and customization. Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD multi-effects. The days of plugging a POD® into the front of an amp are over!

Revolutionary Bogner tube design meets Line 6 HD modeling
The Voicing switch is the heart of DT25 amp. It conjures the characteristic tone, feel and response that are at the heart of four celebrated amp voicings: American clean, British crunch, class A chime and modern high-gain. Different negative feedback loop topologies pair with HD preamp and tone stack modeling to produce the perfect tonal springboards for you to craft your perfect tones.

• Voicing I: Classic American Clean (tight negative feedback loop)
• Voicing II: British Crunch (medium negative feedback loop)
• Voicing III: Class A Chime (zero negative feedback loop)
• Voicing IV: Modern, High-Gain (resonant negative feedback loop)

Selectable operating class and power tube mode
Take your tone in many different directions with the selectable operating classes and power tube modes. Mix and match them with the Voicing switch to dial in truly unique tones. Or align the components in tried-and-true combinations to deliver fresh takes on the immortal classics.

• Selectable operating classes – Class AB/25 watts/fixed bias; Class A/10 watts/cathode biased
• Selectable power tube modes – Pentode; Triode

Any two amps you want, separated by a single channel switch
The two channels can be set to any combination of Voicing, operating class and power tube mode, so the channel switch is more like an A/B switch connected to two different amps. (Or, for a boost channel, set the channels the same with one a little louder.)

For example, set Channel A to a California clean tone. It can be complete with a high amount of negative feedback for a tight sound, characteristic class AB headroom and plenty of pentode-powered body. Set Channel B to deliver vintage Class A chime with zero negative feedback for an open, dynamic feel. Triode mode darkens the tone a bit and rounds off the edges, and Class A operation provides no shortage of touch sensitivity when you dig in with your pick. That’s total analog and digital reconfiguration in one touch.

DT25 amplifier + POD HD multi-effect = Boutique tube amp factory
DT25 amplifiers and POD HD multi-effects don’t just connect, they seamlessly integrate to transform into a boutique tube amp factory capable of creating any tone you need with incredible tone and feel. POD HD multi-effects come to the party with additional models including 20+ HD amp models, 20+ HD guitar preamp-only models, huge collections of effects, cabs, mics and more. With a single L6 LINK connection, you get:

• Automatic analog configuration. Select a POD HD amp model or preset and the DT25 analog components will automatically configure themselves to the appropriate operating class, biasing method, negative feedback topology and power tube mode.

• Save custom analog configurations. Saving your custom DT25 configurations is as easy as saving POD HD presets. Tweak the DT25 amp settings, press Save on the POD HD multi-effect and incredibly unique and complex amp configurations can be recalled instantly.

• No ground loops. You’ll never get ground loop hum from an L6 LINK connection!

[extended list of features]
• Flexible tube section designed by tube-amp guru Reinhold Bogner
• (1) 12AX7, (2) EL84 tubes
• Intuitive, 2-channel design, instantly reconfigurable per channel
• Selectable operating class (Class AB/25 Watts/Fixed Bias or Class A/10 Watts/Cathode Biased)
• Selectable power tube mode (Pentode or Triode)
• Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling): (1) Classic American Clean/Tight NFL (2) British Crunch/Medium NFL (3) Class A Chime/Zero NFL, (4) Modern, High-Gain/Resonant NFL
• HD amp modeling technology fuels each Voicing’s preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry
• Both channels have Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume. Rest of front panel: Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby; Backlit front panel
• Modeled spring reverb with individual level control per channel
• Back-lit front panel
• 4/8/16 ohm speaker outputs
• MIDI I/O
• Series effects loop
• Cabinet simulated direct output
• Low Volume Mode provides cranked up tube tone at whisper-quiet volume
• Speaker jack-sensing provides relay driven output transformer protection circuit
• L6 LINK connects the DT25 amp to a POD HD multi-effect for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK equipped POD HD multi-effect
• Connect a footswitch for simple channel-switching or reverb control. (Footswitch not included)
• Matching 1x12" DT25 extension cab with Custom Celestion® G12H90 speaker sold separately

Source: Line 6 / Vettaville.nl

DT25 - DT25 unofficial specs and differences with DT50... 26-09-2011 Comments (0)

Here are some unofficial specs from the DT25 adaptive amp and some differences to the DT50 amp outlines. Please note these may be changed when necesarry when official info becomes available.

Dimensions Combo 112

Weight 23 Kg, width 53 cm, depth 26 cm, height 45 cm.

Additional dimesions can be found here

DT25 compared to DT50

- EL84 tubes on DT25 provide more creaminess, DT50 is EL34 equipped and provides more girth
- DT25 is a smaller package designed for small clubs with a hughe tone, DT50 is for small and bigger venues 
- DT25 comes in a 112 combo and a 112 closed cab and Head, DT50 comes in Combo 112 and 212, and Head and 4x12 cab configurations
- DT25 with 25 Watts Class AB or 10 Watt Class A, DT50 is 50 Watts Class AB or 25 Watt Class A
- DT25 has no series effects level control adjustment, DT50 does

Source: Vettaville.nl

DT25 - DT25 is Shipping... 26-09-2011 Comments (0)

Line 6 just informed us that the the new DT25 adaptive amp is already shipping it first batch. It may take some time before they reach your local dealer depending on inventory taken en ground to cover. The first initial reactions to the new DT25 amp are overwhelmingly positive. As always go and check your local dealer and play one yourself to see it fits your needs since combination possibillities rea endless..

The pressrelease hasn't reached us yet and Line 6 will be updating it's pages in the upcoming time.

Source: Line 6 / Vettaville.nl

DT25 - DT25 First Video - New Amp... 24-09-2011 Comments (0)

Line 6 seems to be releasing a new DT series amp. The DT25. Andertons released a video on you tube showing the new amp

It seems a small 25 Watt amp in Head and Cab form. See the video here:

Source: Andertons - Vettaville.nl

*Line 6®, Line 6 Inc., AX2, AxSys, BackTrack, BackTrack+Mic, Bass Floor POD®, Bass POD®, Bass POD® xt, Bass POD® xt Pro, Bass POD® xt Live, Constrictor™, Crunchtone™, Customtone, Duoverb, Digital Wireless, DL4™, DM4™, DT25, DT50, Echo Park™, Eight Ball, Filter Pro™, Flextone™, Floorboard, Floor POD®, Floor POD® Plus, FBV Express™, GearBoxâ„¢, GearBoxâ„¢ Plug-In, Guitarport™, GuitarPort® RiffTracker™, GuitarPort® xt, FM4™, HD147®, James Tyler Variax®, Jamware, JM4 Looper, LowDown, Liqua Flange™, M13, MM4™, MIDI Mobilizer, Mobile In, Mobile Keys, Mobile POD®, MOD Pro, POD®, Pocket POD®, Pocket POD® Express, POD® FARM, POD® 300, POD® HD 400, POD® HD 500, POD® HD Pro, POD® Studio, POD® xt, POD®xt Pro, POD® xt Live, POD® X3, POD® X3 Pro, POD® X3 Live, Relay Digital Wireless, Rifftracker™, Roto Machine™, Space Chorus™, Spider™, Spider-Jam™, Spider-Valve™, StageScape™, StageSource™,ToneCore™, TonePort™, TubeTone, Ubermetal™, GX, UX1, UX2, UX8, Verbzilla™, Vetta™, Variax®, Variax® Acoustic, Variax® Workbench™ and Line 6 logos are trademarks of Line 6,

All product names used herein are trademarks of their respective owners, which are in no way associated or affiliated with Line 6 or Vettaville.nl. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development. Fender and Twin Reverb are registered trademarks of Fender Musical Instruments Corporation. Hiwatt is a registered trademark of Fernandes Company Ltd. Supro is a registered trademark of Zinky Electronics, LLC. Gibson is a registered trademark of Gibson Guitar Corp. Dr. Z is a registered trademark of Dr. Z Amps, Inc. Vox is a registered trademark of Vox R&D Limited. Marshall is a registered trademark of Marshall Amplification Plc. Mesa/Boogie and Rectifier are registered trademarks of Mesa/Boogie Ltd. Engl is a registered trademark of Ausflug, Beate and Engl, Edmund.

Inc. RiffWorks, InstantDrummer™, Riffcaster, Rifflink and Sonoma Wire Works™ are trademarks of Sonoma Wire Works™.

Atomic, Atomic Amps, LLC, Atomic Reactor 112, Atomic Reactor 112-50 and Atomic Reactor 212 are trademarks of Atomic Amps.

Bose® and Bose® Personalized Amplification System™ are registered trademarks of Bose. T1 Tonematch, L1, All rights reserved.

SHURE and SM58 are registrated trademarks of Shure Incorparated. Sennheiser is a registered trademark of Sennheiser Electronic Corp. Audix is a registered trademark of Audix Corparation. Audio Technica is a registered trademark of Audio-Technica Corparation. Electro-Voice is a registered trademark of Telex Communications, Inc.

Vinny appears exclusively for Vettaville.nl with courtesy of Vettaville Records Inc.
Channel 6 Web TV is preserved for Vettaville.nl

All other product names used on this website are trademarks of their respective owners, which are in no way associated or affiliated with Vettaville.nl or Vettaville.net. These trademarks of other manufacturers are used solely to identify the products of those manufacturers to identify a certain tone or sound.

Entire contents Copyright © 2003-2012 Vettaville.nl. All Rights Reserved.
Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in Vettaville.nl or Vettaville.net website(s). Prices subject to change without notice.

Copyright © Vettaville.nl 2003-2012, All rights reserved.