Vettaville.nl
Line 6.com Bose L1 Model II info Strymon SV Pre for Spider Valve amps POD X3 series
email
vvnllogosml

Click to Stay Tuned... 07-08-06

The latest info on Line 6 related software programs

Underneath you'll find all software downloads that I currently have available with a short discription of the program and short addional info. Some softwareprograms also have there own webpage for more info.

Click to stay tuned

 

 

SOURCE: VETTAVILLE.NL

half page

Variax - Variax P.I.M. V1.13 available... 07-08-06

Variax VPIM

VPIM ( Variax Patch Information Manager )

VPIM is a utility special for users with a Line 6 Variax guitar and the Variax Workbench software package.
This utillity can save a lot of time. Iinstead of loading different patches into Workbench, you can now
easily search for all patches which have e.g. Special Bird Body with T-Model Bridge and pickups which are
switched in series and are in or out of phase. Now try that for yourself in Workbench.

Variax Patch Information Manager Features:

  • Open a directory with your single patches (*.vwm) and all will be loaded into VPIM
  • Show useable patch information, Variax Workbench is not needed.
  • Search for a combination of Author, BodyType, PickupType, search if pickups are switches in series or parallell , search for pickups which are in phase or out of phase, search for patches which have alternate tunings or default tunings
  • Copy found patches with search to a directory you want.
  • Double click on a patch will automatically launch a patch into Variax Workbench in editor mode if installed (sometimes Workbench need be started manually, patches will then load automatically).
  • Latest opened patch directory will be saved.
  • Added print options for your Workbench bundle
  • Added print options fro your Tone Collection files
  • Does not wite to registry
  • Very small exe <100k
  • No DLL's needed
  • Can be run from USB Stick
  • Workbench is not needed to show information of patches.

Thanks go out to Cor de Visser, he made this freeware program and already made adjustments to it. Read the readme-file inside the Winzip package for more info.

Download the Winzip file, unzip it, open Workbench and run VPIM, seach for your patch directory and let VPIM do the search for you...

This software has not been developed by Line 6. It was not sanctioned by Line 6. This software is distributed as freeware. There is no guarantee with this software. You can submit comments and suggestions, instructions are in the readme file.

Source: cor de Vissser

half page

Guitarportal 2.0 released... 23-11-05

GPortal logo

Many of you are using the guitarport application. A fellow enthousiast Streets created a new portal to have some extra functionality around your guitarport program. The new Guitar Portal 2.0 opened it's free portal-doors today November 23th. So enjoy your Thanksgiving weekend.

Besides the Guitar Portal application there's also the Guitar Portal Tool. Where you can have direct links to the most important Guitar Portal applications and sites. Vettaville's Latest News will be published directly on your computerscreen as it is uploaded.

Be sure to chat with Streets, he's the one that put the project together and available. Enjoy

Please Note: Guitar Portal is in not a Line 6 application, it's a private development and in no way associated or endorsed by Line 6.

Source: STREETs

 

half page

Guitarport Remote... 15-11-05

Guitarport Remote Logo

While using the Guitarport application you sometimes would like to be able to switch between different tones and / or use it as a MIDI controller. Patrick Julien made a program to do just that.

This software has not been developed by Line 6. It was not sanctioned by Line 6. This software is distributed as freeware. There is no guarantee with this software.

 

How to use GP Remote:

  • Open your GuitarPort software
  • Start GP Remote.
    (If you see "GuitarPort Preset:" and the name of the preset loaded in your GuitarPort software, communication between apps is fine)

MIDI Controller User:

  • Config the MIDI port used by your controller (Options...MIDI Controller Devices).
    Make sure no MIDI controller is configured in GuitarPort (in Edit...Preferences...MIDI).

To map a preset to a trigger (Keyboard or MIDI controller ProgramChange command)

  • Click on Map New Trigger.
  • Press a key or send a ProgramChange or Controller command from your MIDI controller.
  • Select a preset in your GuitarPort software.
  • Click Add.

To modify an existing preset:

  • Right click on it and select Edit Preset or just Double click on it.
  • To change the preset associated with this Trigger, click on the button that shows the name of the current GuitarPort preset. (If you change the Preset in your GuitarPort, the button will update itself)
  • Click modify and the preset will be updated in your Trigger mapping window.

To use a sequencer(like Cubase) to change GuitarPort preset automatically:

  • Install a Virtual MIDI Port software (like LoopBe1, search Virtual MIDI Port on Google).
  • Select this virtual device as a controller in GuitarPort Remote (Options...MIDI Controller Devices).
  • Select the same virtual device in your sequencer as MIDI out device.
  • Send a ProgramChange command (Midi Channel 0 should be fine, Report to your Sequencer docs to do that)

The software is free to download and use for everyone, but be nice and pay respects and pay a visit to his website and read. Patrick thanks for the work and enjoyment for all.

The program itself is a zipped file, that you need to 'unzip' and install, read the readme file, or above here for further instructions.

Source: patrick julien

Guitarport Quick Tone Switching... 20-06-05

When using your guitarport you sometimes would like to be able to switch between different tones. Bill Gookin was triggered, a first program called GPController was made...GPController enables you to use the F1 to F12 keys to change predifined tones, or simply to compare tones.

The software is free to download and use for everyone, but be nice and pay respects and pay a visit to his website. Whell Bill thanks for the work put in and stay on the topic whenever you have some spare time.

This software has not been developed by Line 6. It was not sanctioned by Line 6. This software is distributed as freeware. There is no guarantee with this software.

Source: BILL GOOKIN

V Stomp for Guitarport... 07-05-05

There are a lot of Guitarport users out there, one of them is Line 6 Man, a die hard Line 6 fan. He was fiddling around with his gear and discovered a way to have the stompbox feauture in Guitarport change from pre to post. Allthough many would prefer it to be in pre maybe some would like this feauture.

This software has not been developed by Line 6. It was not sanctioned by Line 6. This software is distributed as freeware. There is no guarantee with this software.

Tigerbill came to the rescue and made a small utillity called V Stomp and it changes your stompbox, while using Guitarport from pre to post and back. You can use Guitarport and V stomp at the same time. When V Stomp is activated, set the midi out port to guitarport, and use the big button to set it pre/post. The button is labeled with pre or post for your reference.V Stomp it's freeware so you don't have to pay anything. Thanks to Line 6 Man and Tigerbill


source: Line 6 man / tigerbill

Line 6 EDIT is now available for download from the Line 6 website

.

click above for a preview

 

You can use Line 6 Edit with the following Line 6 products

Complete editor voor POD, Flextone III, HD 147, Vetta II met tonetransfer tussen deze product platvormen

Patchmanager V1.10 by Peter van Vegchel

Patchmanager is een editor voor de Line 6 Flextone III en Duoverb versterkers. Dit programma is van Nederlandse bodem en biedt de mogelijkheid om alle instellingen / versterkers en effecten te overzien en in te stellen. Natuurlijk zoals de naam al doet vermoeden kun je ook alle patches bewerken en bewaren.


********* Now also supporting the DUOVERB amplifier ********

If you are using the LINE 6 flextone III or duoverb amplifier you can use the Patchmanager for arranging and editing your favorite patches. You can edit all controllers, even the one's who are not directly accessible from the amplifier (like the reverb type's).

Editing is possible by adjusting the different knobs on the patchmanager or by turning the knobs on your amplifier.
For any comment's or suggestions on this program please mail me.
p.van.vegchel@hccnet.nl


Download the patchmanager now. It's completly free to use

Here's a screenshot ...

Disclaimer

This software has not been developed by Line6 Corporation. It was not sanctioned by Line6 Corporation. This software is distributed as freeware. There is no guarantee with this software. IYou can submit comments and suggestions to: p.van.vegchel@hccnet.nl

PODScope Overzicht

Software gecreerd door GM Arts

gmarts@chariot.net.au

PodScope V1.0 Beta by GM Arts

Underneath a software overview

Nearly 10 years ago I wrote an application to allow Roland GP-100 users to view their settings in a simple text display.   Now I've gone and done it all again, this time for PODxt users.   PodScope is a Windows application that allows you to view your PODxt settings as text, print them, add notes, and share them with other users.

Here's a screenshot ...

Installation

  • Read the disclaimer at the bottom of this page first
  • Download it
  • Extract all files in the zip to any directory and then run setup.exe
  • When completed, you can safely delete the installation files

How To Use

Use PodScope to get your settings via MIDI , or open a PODxt System Exclusive file (plenty of these on the net ;-).   You can request and view any of the PODxt settings: current patch, a nominated patch, all channels, amp setups or FX setups.

Use the dropdown list to select different patches, if you've loaded more than one.

Click the Notes button to add notes to a patch (they're listed at the bottom of the view area)

Save to save your settings & notes as text - there are 2 file type options:
(1) Plain Text is probably best for copying into emails and user forums
(2) Rich Text is best for viewing later in a word processor

Click Print to print your settings and notes (did I mention it's intuitive?)

Click Options to customise your display options

The Definition File

  • I've tried to keep the application as generic as possible, so it uses a definition file (PodScope.def) to load model names, describe how sysex data is interpreted, show how values are presented, etc.   This will also allow easy upgrades as POD firmware is improved (post EQ maybe, hint hint ;-), and also other languages can be supported to a reasonable extent.

System Requirements

Windows 95 and above only

PODxt only (but if someone would like to buy me a Vetta ... ;-)

The supplied definition file supports PODxt version 1.04, although it will work with older versions, showing the version 1.04 model names (changing Rectifier to Threadplate is the only one I'm aware of).

Testing & Plans

This is version 1.0 Beta, so at this early stage, I'm interested mainly in removing any bugs you may find.  

Please email me with the word "PodScope" in the subject. I expect to release version 1.0 soon, with no known bugs, and at least with its current functionality.

I don't plan to develop this into a graphical editor or librarian.

I am considering other features such as saving settings back into your POD over MIDI, and also a CSV file format so users can export text settings into a database.

Download PODScope V1.0 Beta

The first download needs to include many support files (some of which you probably already have on your PC anyway).   Updates will be *much* smaller.

 

Disclaimer

Conditions Of Use - Plain English Disclaimer

  • PodScope is free, but you can't sell it, or exchange it for goods or services of value.
  • It's not supported or guaranteed for upgrade or removal of bugs.
  • The author accepts no responsibility or liability for any loss of any kind associated with the use or installation of PodScope.
  • The settings viewer concept is (C)opyright GM Arts 1994-2003.
  • Your installation or use of PodScope implies agreement to these terms.

This software has not been developed by Line6 Corporation. It was not sanctioned by Line6 Corporation. This software is distributed as freeware. There is no guarantee with this software. You can submit comments and suggestions to gmarts@chariot.net.au

*Line 6®, Line 6 Inc., AX2, AxSys, BackTrack, BackTrack+Mic, Bass Floor POD®, Bass POD®, Bass POD® xt, Bass POD® xt Pro, Bass POD® xt Live, Constrictor™, Crunchtone™, Customtone, Duoverb, DL4™, DM4™, Echo Park™, Eight Ball, Filter Pro™, Flextone™, Floorboard, Floor POD®, Floor POD® Plus, FBV Express™, GearBox™, GearBox™ Plug-In, Guitarport™, GuitarPort® RiffTracker™, GuitarPort® xt, FM4™, HD147®, Jamware, JM4 Looper, LowDown, Liqua Flange™, M13, MM4™, MOD Pro, POD®, Pocket POD®, Pocket POD® Express, POD® FARM, POD® Studio, POD® xt, POD®xt Pro, POD® xt Live, POD® X3, POD® X3 Pro, POD® X3 Live, Rifftracker™, Roto Machine™, Space Chorus™, Spider, Spider-Jam™, Spider-Valve™, ToneCore™, TonePort™, TubeTone, Ubermetal™, GX, UX1, UX2, UX8, Verbzilla™, Vetta, Variax®, Variax® Acoustic, Variax® Workbench™ and Line 6 logos are trademarks of Line 6,

Inc. RiffWorks, InstantDrummer™, Riffcaster, Rifflink and Sonoma Wire Works™ are trademarks of Sonoma Wire Works™.

Atomic, Atomic Amps, LLC, Atomic Reactor 112, Atomic Reactor 112-50 and Atomic Reactor 212 are trademarks of Atomic Amps.

Bose® and Bose® Personalized Amplification System™ are registered trademarks of Bose. T1 Tonematch, L1, All rights reserved.

Vinny appears exclusively for Vettaville.nl with courtesy of Vettaville Records Inc.
Channel 6 Web TV is preserved for Vettaville.nl

All other product names used on this website are trademarks of their respective owners, which are in no way associated or affiliated with Vettaville.nl or Vettaville.net. These trademarks of other manufacturers are used solely to identify the products of those manufacturers to identify a certain tone or sound.

Entire contents Copyright © 2003-2008 Vettaville.nl. All Rights Reserved.
Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in Vettaville.nl or Vettaville.net website(s). Prices subject to change without notice.

Copyright © Vettaville.nl 2003-2008, All rights reserved.