|
|
| |
Flextone III page*
This amp with the Line 6 modeling technology deserves it's own page here at Vettaville for shure. While it is far from complete it is a start and one that you'll find interesting. Of course for the obvious info you can go to the Line 6 site for info, but here at Vettaville we'll try to have that additional info that helps you along even further. So feel free to mail Vettaville (press contact in the above menu) with the info you want added and we'll see if we can fit it in. Of course it has to help others and the info is not available on the normal Line 6 site in the Flextone area. On this page you find additional info and software like the Flextone Tuner Wizard, and more over time! Of course you'll find links to Line 6 / upgrades and FCB files to work with your Flextone... Under the above Tone Quest menu you'll find interesting articles, most of them apply to every amp.
|
Flextone III update / upgrade available
Line 6 has a free update available since the first half of 2004 for Flextone III. Version V1.10 is available now. It has upgraded amps and cabs. Free to download and install. Source: Line 6 |
Tuner Wizard for Flextone III
Here a small application to adjust your Tuner in Flextone III, note this in not a Line 6 application but made by Daniel Lemoine. The Tuner Wizard is self-explanatory, just open expand the compressed file and run the application with your Flextone and Midi in & out connected. Here's a screenshot
Source and courtesy of: Daniel Lemoine |
FCB 1010 with Flextone III
Vettaville has a special Footcontrollers page where you can find the info and sysex files to program your FCB pedal. Of course the best way is a Line 6 FBV series footpedal..This Section gives you the possibillity to use a Behringer FCB 1010 floorpedal with a Line 6 Flextone III, currently test are done to see if the same files could be used for HD 147, when clear on that we'll post so.
|
Flextone Amp Matrix
Vettaville has an amp Matrix where you can see all the different Line 6 products and the amps they have inside, of course the Flextone series is in there.
|
Patchmanager V1.10
If you are using the Line 6 Flextone III (or Duoverb) amplifier you can use the Patchmanager for arranging and editing your favorite patches. You can edit all controllers, even the one's who are not directly accessible from the amplifier (like the reverb type's). Editing is possible by adjusting the different knobs on the patchmanager or by turning the knobs on your amplifier. For any comment's or suggestions on this program please mail me. p.van.vegchel@hccnet.nl
Here's a screenshot ...
Disclaimer This software has not been developed by Line 6 Corporation. It was not sanctioned by Line6 Corporation. This software is distributed as freeware. There is no guarantee with this software. You can submit comments and suggestions to: p.van.vegchel@hccnet.nl Source and courtesy of: PETER VAN VEGCHEL |
Helpfull documents for Flextone users
Contributions to the Vettaville site have been made by different guitarists. There are documents for Flextone users that cover:
|
What's next?
Aahh, apetite, maybe you'll be surprised what's in store in but not yet available..... When new info arrives it'll be added here and anounced at the latest news page with alink to it as we're sure you're aware of. We're aware of that this first pages is far from complete, but over time it'll gain info.. And now there's the Tweakwizard page for Flextone III
|
*Line 6®, Line 6 Inc., AX2, AxSys, BackTrack, BackTrack+Mic, Bass Floor POD®, Bass POD®, Bass POD® xt, Bass POD® xt Pro, Bass POD® xt Live, Constrictor™, Crunchtone™, Customtone, Duoverb, DL4™, DM4™, Echo Park™, Eight Ball, Filter Pro™, Flextone™, Floorboard, Floor POD®, Floor POD® Plus, FBV Express™, GearBox™, GearBox™ Plug-In, Guitarport™, GuitarPort® RiffTracker™, GuitarPort® xt, FM4™, HD147®, Jamware, JM4 Looper, LowDown, Liqua Flange™, M13, MM4™, MOD Pro, POD®, Pocket POD®, Pocket POD® Express, POD® FARM, POD® Studio, POD® xt, POD®xt Pro, POD® xt Live, POD® X3, POD® X3 Pro, POD® X3 Live, Rifftracker™, Roto Machine™, Space Chorus™, Spider™, Spider-Jam™, Spider-Valve™, ToneCore™, TonePort™, TubeTone, Ubermetal™, GX, UX1, UX2, UX8, Verbzilla™, Vetta™, Variax®, Variax® Acoustic, Variax® Workbench™ and Line 6 logos are trademarks of Line 6, Inc. RiffWorks, InstantDrummer™, Riffcaster, Rifflink and Sonoma Wire Works™ are trademarks of Sonoma Wire Works™. Atomic, Atomic Amps, LLC, Atomic Reactor 112, Atomic Reactor 112-50 and Atomic Reactor 212 are trademarks of Atomic Amps. Bose® and Bose® Personalized Amplification System™ are registered trademarks of Bose. T1 Tonematch, L1, All rights reserved. Vinny appears exclusively
for Vettaville.nl with courtesy of Vettaville Records Inc. All other product names used on this website are trademarks of their respective owners, which are in no way associated or affiliated with Vettaville.nl or Vettaville.net. These trademarks of other manufacturers are used solely to identify the products of those manufacturers to identify a certain tone or sound. Entire contents Copyright
© 2003-2008 Vettaville.nl. All Rights Reserved. Copyright © Vettaville.nl 2003-2008, All rights reserved. |
